Chemco

HomeBusinessDemestic AgentChemco

Domestic Agency There is the passion for the technology in the best value of Gunho

GUNHO E&C Co. will provide customers the best quality by partnership with the companies of the top technical skills and professionalism in each field.

Prochem International is the Korean distributor of Chemco International, which is a British company in a leading position in terms of the advanced coating materials and polymers, with a history of more than 30 years of making and applying protective coats. We are an expert in the field of corrosion prevention/acid resistance/wearing resistant coating with two decades of experience and application techniques. GUNHO E&C Co., Ltd. is the partner of Chemco/Prochem International, which is the world's best coating company, in Ulsan area and will provide the best technology and products.

The characteristics of the new anti-corrosion coationg material

Characteristics
  • High-pressure water jet - Removes the salt and performs the pre-treatment at the same time.
  • No need to recollect and dispose of the used grits
  • No need of air compressor, dehumidifier, ventilator, or heater.
  • No limitation related to the humidity or the dew point - can be used under any weather conditions
  • The application may begin immediately after the high pressure water jet.
  • High adhesion performance on existing coats - Saves the cost of removing the old coat
  • Can harden even underwater - The facility can be up and runing in a shorter amount of time.
  • No limits on reworking - Flexibility in construction schedule
  • Environmentally - friendly
Application
  • Tank (Roof & Floating Deck)
  • Cooling Tower(Basin) & Pump
  • Pipe & Heat Exchanger Inside
BEFORE COATING AFTER COATING

Characteristics of RL 500PF

Characteristics
  • Good adhesion on moisture/rusty/oily surfaces
  • Primer and finish-coat in a single coating
  • Superb corrosion resistance and UV resistance (MIO-Zinc)
  • Can be applied on to the surfaces where condensation is expected
  • Can be applied and used on a surface as hot as 150'C
  • Superb corrosion-resistance preventing CUI
  • Good adherence to the old coat
  • Good adherence to stainless steel and Gl steel materials
Key Applications of RL 500PF
  • Industrial equipment structure
  • Marine equipment structure
  • Steam pipe line In operation and outside of a high temperature pipe line
  • Outside of various pipe lines, including ones with condensation
  • Corrosion prevention under insulator
  • Power Line Tower
  • Bridges
  • Structures and pipe lines where it is difficult to remove moisture/water and only minimum surface treatment is possible

RC 500GTC High Gloss/Anti-UV/Anti-chemical top coat

Characteristics
  • High UV resistance
  • High chemical and salt water resistance
  • High glossy and good color stability
  • Maintains good appearances for long time
  • Only one layer of application will conceal the bottom color superbly
  • Ideal top coat for petrochemical equipment and marine structures
  • No limit on reworking

Characteristics RS 500PF

Characteristics
  • Good adhesion performance on watery and rusty surfaces
  • No solvents required
  • Primer and finish-coat in a single coating
  • Superb corrosion resistance(MIO-Zinc)
  • No need of dehumidifiers, ventilators, and heaters
  • Can be applied on to the surfaces where condensation is expected
  • Good adherence to the old coat
  • Ideal for storage tanks, pipe lines, and other closed area lining
  • Safe for workers and without the risk of fire
Key Applications of RS 500PF
  • Industrial equipment
  • Marine equipment
  • Waste water treatment equipment
  • Lining for various types of storage tanks
  • Lining for various types of pipe lines
  • Outside of various pipe lines, including ones with condensation
  • Structures and pipe lines where it is difficult to remove moisture/water and only minimum surface treatment is possible.

Characteristics of RA 500M

Characteristics
  • Lasting anti-corrosion performance with the Glassflake technology
  • High adhesion performance on watery surfaces
  • No solvents required
  • High chemical resistance
  • Can be applied on to the surfaces where condensation is expected
  • Good adherence to the old coat
  • NSF 61 Certification - for drinking water
  • Ideal for storage tanks, pipe lines, and other closed area lining
  • Safe for workers and without the risk of fire
Key applications of RS 500P/RA 500M
  • Industrial equipment
  • Marine equipment
  • Waste water treatment equipment
  • Lining for various types of storage tanks
  • Lining for various types of pipe lines
  • Outside of various pipe lines, including ones with condensation
  • Structures and pipe lines where it is difficult to remove moisture/water and only minimum surface treatment is possible.
SITE MAP
Customer Service
Recruitment